Lansinoh Latch Assist Nipple Everter

Lansinoh Latch Assist Nipple Everter

Frustrated by flat or inverted nipples? The Lansinoh® LatchAssist® Nipple Everter gently draws out flat or inverted nipples, making it easier for your baby to latch and feed at the breast. Easy to attach, allowing you to control its level for your comfort. Includes two shields (19 mm and 24 mm) for a good fit.

Instructions for use:

Always wash and dry your hands before touching the LatchAssist®.

Before use, wash the LatchAssist® Nipple Everter parts (the bulb, shield and box) in hot soapy water. Do not place LatchAssist® parts directly in the sink, as microbes in the sink or drain can contaminate them. Place the LatchAssist® parts in a clean sink used only for washing baby items.

After washing, lay the LatchAssist® parts on a clean, unused kitchen towel or paper towel in an area protected from dirt and dust. Do not use a kitchen towel to rub or lightly dry them. Let the LatchAssist® parts air dry before use and storage.

Gently squeeze the bulb and place the shield on and around the nipple. Gently press the shield down to create an airtight seal. Check the bulb for the correct pressure. Repeat, but only until your nipple is drawn out and the baby can easily latch onto the breast. To remove, squeeze the bulb and gently pull away from the breast. After use, wash again, rinse and air dry.